22 Ton Bruderer, Mdl BSTA-22-E, (4) Pillar Type, 1.5" Str, 7.12"-9.09" SH, 22" x 15.75" Bed, R-L Roll Feed, 1986 (#22017)
|
|
USED 22 TON BRUDERER AUTOMATIC HIGH SPEED PRESS
(4) Pillar Type
Model No. BSTA-22-E
AIR CLUTCH & BRAKE
Stroke: 1.5" (Adjustable)
Slide Adjustment: 1.97"
Shut Height S.D.A.U.: 7.12" - 9.09"
Area of Bed: 22" L-R x 15.75" F-B
Opening in Bed: 14.17" L-R x 6.7" F-B
Area of Slide: 21.75" L-R x 10.75" F-B
Maximum Strip Width: 6.3"
Strip Height: 1.97" - 4.72" (Adjustable)
Feed Length: 0 - 3.35" (Adjustable)
S.P.M. Approx.: 100 - 1800 S.P.M.
Floor to Top of Bed: 35"
EQUIPPED WITH: Bruderer Model 190/85 Precision
Roll Feed - Right to Left Feed
Bruderer Free Standing Control
w/Push-Pull Button For Start -
Stop; Dual Pushbuttons For Ram
Start - Continuous - Stroke
Key Selector Switch For Control
Off - On - Start
Selector Switch For Strip End -
Control Off-On; Blow Off-On-Off
Pushbuttons For Start - Stop
Bruderer Digital Inching & Hour Gauges
Speed Control Knob For Slower-Faster
Digital Piece Counter Gauge With
Setting Control
Machine Mounted Control With
Pushbuttons For Ram Start - Stop -
Continuous Stroke
Key Selector Switch For Inch -
Single Stroke - Continuous -
Stroke Adjustment & Ram Adj.
Automatic Oil Lubrication
20 HP 3000 RPM 340/440/60 V/S Motor
Weight approx. 8200#
Overall Dimensions Approx. 44" L-R x 51" F-B x 92" H (Machine)
31" L-R x 31" F-B x 90" H (Control)
Serial No. 4005 (1986)
Stock No. 22017-Z
FOB ELK GROVE VILLAGE, IL -
CONDITIONS OF SALE
TERMS: |
Net cash, or one-third with order, balance before shipment. |
CONDITIONS: |
All quotations are for immediate acceptance. They are subject to
withdrawal, change and prior sale without notice. Shipping dates
are only approximate and contingent upon delays beyond our control.
All orders received are binding only when they have been accepted
and acknowledged by us in writing. Provisions in customer's purchase
orders contrary to these conditions shall not be binding upon
us unless accepted in writing. Unless otherwise specified, prices
quoted are F.O.B. shipping point, exclusive of State, County and
Federal taxes which must be added where applicable. Care is taken
to give reliable specifications, but these are not guaranteed.
We reserve the right to correct typographical errors. |
INDEMNIFICATION: |
Used Machines may not incorporate approved activating mechanisms,
operator safety devices or safety guards as required by OSHA or
otherwise. It is the user's responsibility that the said machines
be so equipped and safeguarded to meet OSHA and any other requirements
before placing such machinery into operation. User agrees to indemnify
and hold Seller harmless of and from any and all claims or liabilities
from accidents involving these machines caused by failure of user,
his employees, or agent to follow instructions, warnings, or recommendations
furnished by manufacturer, or Seller, or by failure of user to
comply with Federal, State and Local laws applicable to such equipment
including the Occupational Safety and Health Act of 1970. User
shall notify Seller promptly after occurrence of any accident
involving these machines, and shall cooperate fully with Seller.
or Seller's agent in investigating and determining the cause of
said accident.
|
GUARANTEE
(Conforming to M.D.N.A. Code of Ethics)
MACHINES OFFERED FROM OUR STOCK ARE GUARANTEED TO BE MECHANICALLY
SATISFACTORY OR RETURNABLE IN THE SAME CONDITION AS SHIPPED, FREIGHT
PREPAID, WITHIN 30 DAYS FROM SHIPMENT FOR COMPLETE REFUND. THIS
DOES NOT APPLY TO MACHINES SOLD "AS IS." |
|
