150 Ton, HPM #CU-3, Housing Type, Dbl. Acting, 36"/19" str., 80"/55" DL, 36" x 36" bed, Cushion, 100 HP (#19135)
|
|
USED 150 TON HPM DOUBLE ACTING HYDRAULIC PRESS
w/50 Ton Bed Cushion
MODEL CU-3
Downstroke Type
Housing Type Tie Rod Construction
Slide Over Slide Design Gib Guided
Capacities Draw Slide: 150 Tons Maximum
Blankholder: 50 Tons Maximum
Cushion: 50 Tons Maximum
Distance Between Housings: 37"L R
Area of Bed: 36" L R x 36" F B
Area of Bed Bolster: 34" L R x 36" F B x 4" Thick
Area of Blankholder: 36" L R x 36" F B x 6" Thick
Opening in Blankholder: 21" Diameter
Cushion Area: 23" L R x 23" F B
Stroke of Draw Slide: 0 - 36" Maximum
Stroke of Blankholder: 0 - 19" Maximum
Stroke of Hydraulic Cushion: 0 - 18" Maximum
Daylight Opening Draw Slide: 80" Maximum Over Bolster
Blankholder: 55" Maximum Over Bolster
Single Action: 74" Maximum Over Bolster
Main Ram Diameter: 12"/11" @ 2650 PSI 150 Tons
Blankholder Rams Diameter (4): 3" @ 3550 PSI 50 Tons
Cushion Ram Diameter: 5.75"/3.5" @ 3850 PSI 50 Tons
Floor to Top of Bolster: 30"
Power Unit (Top Rear of Press): HPM Model 3140 95 Radial Piston Pump,
95 GPM @ 2750 PSI
Driven by 100 HP 875 RPM
220/3/60 Motor
Speeds Approx.: 1200"/Min. Closing
195"/Min. Pressing to 150 Tons
1200"/Min. Return
Controls: Pushbutton Operation w/Stroke &
Pressure Control
Single Stroke Manual Semi Auto.
Operation
Pressure Gauge
Weight approx. 43,000#
Overall Dimensions Approx. 6' L R x 8'6" F B x 21' H
(Pit Required For Cushion)
Serial No. 51-67 (WLEW)
Stock No. 19135
FOB ELK GROVE VILLAGE, IL
CONDITIONS OF SALE
TERMS: |
Net cash, or one-third with order, balance before shipment. |
CONDITIONS: |
All quotations are for immediate acceptance. They are subject to
withdrawal, change and prior sale without notice. Shipping dates
are only approximate and contingent upon delays beyond our control.
All orders received are binding only when they have been accepted
and acknowledged by us in writing. Provisions in customer's purchase
orders contrary to these conditions shall not be binding upon
us unless accepted in writing. Unless otherwise specified, prices
quoted are F.O.B. shipping point, exclusive of State, County and
Federal taxes which must be added where applicable. Care is taken
to give reliable specifications, but these are not guaranteed.
We reserve the right to correct typographical errors. |
INDEMNIFICATION: |
Used Machines may not incorporate approved activating mechanisms,
operator safety devices or safety guards as required by OSHA or
otherwise. It is the user's responsibility that the said machines
be so equipped and safeguarded to meet OSHA and any other requirements
before placing such machinery into operation. User agrees to indemnify
and hold Seller harmless of and from any and all claims or liabilities
from accidents involving these machines caused by failure of user,
his employees, or agent to follow instructions, warnings, or recommendations
furnished by manufacturer, or Seller, or by failure of user to
comply with Federal, State and Local laws applicable to such equipment
including the Occupational Safety and Health Act of 1970. User
shall notify Seller promptly after occurrence of any accident
involving these machines, and shall cooperate fully with Seller.
or Seller's agent in investigating and determining the cause of
said accident.
|
GUARANTEE
(Conforming to M.D.N.A. Code of Ethics)
MACHINES OFFERED FROM OUR STOCK ARE GUARANTEED TO BE MECHANICALLY
SATISFACTORY OR RETURNABLE IN THE SAME CONDITION AS SHIPPED, FREIGHT
PREPAID, WITHIN 30 DAYS FROM SHIPMENT FOR COMPLETE REFUND. THIS
DOES NOT APPLY TO MACHINES SOLD "AS IS." |
|
