300 Ton, Elmes #6925, 4 post, 100 Ton Hyd. Cushion, 24" str, 36" DL, 72" x 48" bed (#15820)
|
|
USED 300 TON ELMES 4-POST HYDRAULIC PRESS
MODEL 6925
4 Post Type; Gib Guided Design
Downstroke
Tie Rod Construction
Single Action w/100 Ton Hydraulic Bed Cushion
Distance Between Square Guide Posts: 72" L-R x 27" F-B
Bed Area (Nominal): 72" L-R x 48" F-B
Area of Bed Bolster: 72" L-R x 46" F-B x 6" Thick
Area of Slide (Nominal): 65" L-R x 41.5" F-B
Area of Cushion Platen: 59" L-R x 31" F-B (Approx.)
Stroke of Gib Guided Slide: 0 - 24" Maximum
Daylight Opening Over Bolster: 36" Maximum
Stroke of Gib Guided Cushion: 0 - 10" Maximum
Main Ram Diameter (1): 16.5" w/9.5" Dia. Internal Ram @
2370 PSI - 253.5 Tons
Side Ram Diameter (2): 5" Dia. @ 2370 PSI - 46.5 Tons
Pullack Ram Diameter (2): 5" Dia. @ 2290 PSI - 45 Tons
Cushion Ram Diameter (1): 11.5" w/7" Dia. Internal Ram @
1925 PSI - 100 Tons
Floor to Top of Bolster: 38.5"
Power Units (Top Sides of Press): (2) Vickers Model PV-2080-FHAB
Variable Volume Piston Pumps,
77 GPM @ 2500 PSI Each
Each Driven by 75 HP 1175 RPM
220/440/3/60 D.E. Motor
Speeds Approx.: 900"/Min. Closing
320"/Min. Pressing to 115 Tons
140"/Min. Pressing to 300 Tons
900"/Min. Return to 45 Tons Gross
Controls: Pushbutton Operation w/Stroke &
Pressure Controls
Dual Operator Palm Buttons
Weight approx. 94,500#
Overall Dimensions Approx. 16' L-R x 7' F-B x 18' H (Above Floor)
(Cushion Extends Approx. 5' Below Press Feet)
Serial No. K6481 (WLDR)
Stock No. 15820
FOB ELK GROVE VILLAGE, IL -
CONDITIONS OF SALE
TERMS: |
Net cash, or one-third with order, balance before shipment. |
CONDITIONS: |
All quotations are for immediate acceptance. They are subject to
withdrawal, change and prior sale without notice. Shipping dates
are only approximate and contingent upon delays beyond our control.
All orders received are binding only when they have been accepted
and acknowledged by us in writing. Provisions in customer's purchase
orders contrary to these conditions shall not be binding upon
us unless accepted in writing. Unless otherwise specified, prices
quoted are F.O.B. shipping point, exclusive of State, County and
Federal taxes which must be added where applicable. Care is taken
to give reliable specifications, but these are not guaranteed.
We reserve the right to correct typographical errors. |
INDEMNIFICATION: |
Used Machines may not incorporate approved activating mechanisms,
operator safety devices or safety guards as required by OSHA or
otherwise. It is the user's responsibility that the said machines
be so equipped and safeguarded to meet OSHA and any other requirements
before placing such machinery into operation. User agrees to indemnify
and hold Seller harmless of and from any and all claims or liabilities
from accidents involving these machines caused by failure of user,
his employees, or agent to follow instructions, warnings, or recommendations
furnished by manufacturer, or Seller, or by failure of user to
comply with Federal, State and Local laws applicable to such equipment
including the Occupational Safety and Health Act of 1970. User
shall notify Seller promptly after occurrence of any accident
involving these machines, and shall cooperate fully with Seller.
or Seller's agent in investigating and determining the cause of
said accident.
|
GUARANTEE
(Conforming to M.D.N.A. Code of Ethics)
MACHINES OFFERED FROM OUR STOCK ARE GUARANTEED TO BE MECHANICALLY
SATISFACTORY OR RETURNABLE IN THE SAME CONDITION AS SHIPPED, FREIGHT
PREPAID, WITHIN 30 DAYS FROM SHIPMENT FOR COMPLETE REFUND. THIS
DOES NOT APPLY TO MACHINES SOLD "AS IS." |
|
