6 Ton Denison, Mdl WR65, 6-Sta. 21" Dia. Table, 12" Str, 16" DL, 18" x 12" Bed, 1981 (#22926)
|
|
USED 6 TON DENISON GAP FRAME ROTARY TABLE HYDRAULIC PRESS
NEW 1981
Model WR65LC369SSI
Table Model - On Factory Stand
With Model 106R 6-Station 21" Dia. Rotary Index Table
Bed Area: 18" L-R x 12" F-B w/5" U-Slot
Stroke: 0 - 12" Maximum
Daylight Opening (Total): 16" Maximum
Daylight Opening (Index Table to Ram): 8" Maximum
Throat Depth: 7.5"
Ram Diameter: 3.25"/2.25" @ 1450 PSI - 6 Tons
Floor to Top of Rotary Table: 30"
Power Unit: Denison Model T5C-005 Hydraulic Pump,
Driven by 3 HP 1755 RPM
230/460/3/60 Motor
Speeds Approx.: 480"/Min. Closing
185"/Min. Pressing to 6 Tons
440"/Min. Return
Controls: Pushbutton Operation With Stroke &
Pressure Control
Operator Pushbutton For Run & Stop
Pressure Gauge
Weight approx. 2100#
Physical Dimensions Approx. 36" L-R x 52" F-B x 82" H
Serial No. 27591 (1981)
Stock No. 22926
FOB ELK GROVE VILLAGE, IL
CONDITIONS OF SALE
TERMS: |
Net cash, or one-third with order, balance before shipment. |
CONDITIONS: |
All quotations are for immediate acceptance. They are subject to
withdrawal, change and prior sale without notice. Shipping dates
are only approximate and contingent upon delays beyond our control.
All orders received are binding only when they have been accepted
and acknowledged by us in writing. Provisions in customer's purchase
orders contrary to these conditions shall not be binding upon
us unless accepted in writing. Unless otherwise specified, prices
quoted are F.O.B. shipping point, exclusive of State, County and
Federal taxes which must be added where applicable. Care is taken
to give reliable specifications, but these are not guaranteed.
We reserve the right to correct typographical errors. |
INDEMNIFICATION: |
Used Machines may not incorporate approved activating mechanisms,
operator safety devices or safety guards as required by OSHA or
otherwise. It is the user's responsibility that the said machines
be so equipped and safeguarded to meet OSHA and any other requirements
before placing such machinery into operation. User agrees to indemnify
and hold Seller harmless of and from any and all claims or liabilities
from accidents involving these machines caused by failure of user,
his employees, or agent to follow instructions, warnings, or recommendations
furnished by manufacturer, or Seller, or by failure of user to
comply with Federal, State and Local laws applicable to such equipment
including the Occupational Safety and Health Act of 1970. User
shall notify Seller promptly after occurrence of any accident
involving these machines, and shall cooperate fully with Seller.
or Seller's agent in investigating and determining the cause of
said accident.
|
GUARANTEE
(Conforming to M.D.N.A. Code of Ethics)
MACHINES OFFERED FROM OUR STOCK ARE GUARANTEED TO BE MECHANICALLY
SATISFACTORY OR RETURNABLE IN THE SAME CONDITION AS SHIPPED, FREIGHT
PREPAID, WITHIN 30 DAYS FROM SHIPMENT FOR COMPLETE REFUND. THIS
DOES NOT APPLY TO MACHINES SOLD "AS IS." |
|
