15 Ton TMP, Vacuum Press, Slab Side, 9" Str, 16" x 34" Htd Pltns, 1988 (#23359)
|
|
USED 15 TON TMP HOT PLATEN MOLDING & LAMINATING VACUUM PRESS
NEW 1988
Hydraulic
w/Sterlco Oil Heater
Slab-Side Up-Acting Type - Floor Standing
Distance Between Slab Sides: 26" L-R
Platen Area (Nominal): 16" L-R x 34" F-B
Stroke of Gib Guided Platen: 0-9" Maximum
Daylight Opening (Total): 16" Maximum
Daylight Opening Between Hot Plates (1): 8" Maximum
Hot Plates (2): 16" L-R x 34" F-B
(Drilled For Oil Heating)
Insulation (2): 16" L-R x 34" F-B
Main Ram Diameter (1): 7"/4" @ 780 PSI - 15 Tons
Floor to Top Of Moving Platen: 34"
Power Unit (Free Standing): Dowty Hydraulic Pump Driven By
2 HP 1725 RPM 230/460/3/60 Motor
Dowty Hydraulic Pump Driven By
2 HP 1725 RPM 230/460/3/60 Motor
Vacuum Pump Driven By
5 HP 1740 RPM 230/460/3/60 Motor
Controls: Pushbutton Operation w/Stroke &
Pressure Control
Dual Palm Buttons
Selector Switch for Manual Or Semi-
Automatic Operation
Cycle Timers for Vacuum, Cure, Low &
High
Sterlco Oil Heater Model M2132016-MO
S/N 33B5680
Weight Approx. 600# (Press); 2000# (Power Unit)
600# (Tank); 600# (Oil Heater)
Overall Dimensions Approx. 42" L-R x 50" F-B x 56" H (Press)
48" L-R x 55" F-B x 65" H (Power Unit)
36" L-R x 36" F-B x 90" H (Tank)
20" L-R x 48" F-B x 48" H (Oil Heater)
Serial No. 20187 (1988)
Stock No. 23359-Z
FOB ELK GROVE VILLAGE, IL -
CONDITIONS OF SALE
TERMS: |
Net cash, or one-third with order, balance before shipment. |
CONDITIONS: |
All quotations are for immediate acceptance. They are subject to
withdrawal, change and prior sale without notice. Shipping dates
are only approximate and contingent upon delays beyond our control.
All orders received are binding only when they have been accepted
and acknowledged by us in writing. Provisions in customer's purchase
orders contrary to these conditions shall not be binding upon
us unless accepted in writing. Unless otherwise specified, prices
quoted are F.O.B. shipping point, exclusive of State, County and
Federal taxes which must be added where applicable. Care is taken
to give reliable specifications, but these are not guaranteed.
We reserve the right to correct typographical errors. |
INDEMNIFICATION: |
Used Machines may not incorporate approved activating mechanisms,
operator safety devices or safety guards as required by OSHA or
otherwise. It is the user's responsibility that the said machines
be so equipped and safeguarded to meet OSHA and any other requirements
before placing such machinery into operation. User agrees to indemnify
and hold Seller harmless of and from any and all claims or liabilities
from accidents involving these machines caused by failure of user,
his employees, or agent to follow instructions, warnings, or recommendations
furnished by manufacturer, or Seller, or by failure of user to
comply with Federal, State and Local laws applicable to such equipment
including the Occupational Safety and Health Act of 1970. User
shall notify Seller promptly after occurrence of any accident
involving these machines, and shall cooperate fully with Seller.
or Seller's agent in investigating and determining the cause of
said accident.
|
GUARANTEE
(Conforming to M.D.N.A. Code of Ethics)
MACHINES OFFERED FROM OUR STOCK ARE GUARANTEED TO BE MECHANICALLY
SATISFACTORY OR RETURNABLE IN THE SAME CONDITION AS SHIPPED, FREIGHT
PREPAID, WITHIN 30 DAYS FROM SHIPMENT FOR COMPLETE REFUND. THIS
DOES NOT APPLY TO MACHINES SOLD "AS IS." |
|
