Complete Inventory > Presses > Hydraulic C Frame Press, Multipress and Gap Frame Press Used 1 Ton Denison, 3" str., 8" DL, 10" x 7.5" bed, #23592

Click For Larger Image

USED 1 TON DENISON MULTIPRESS HYDRAULIC C FRAME PRESS
Model A
Table model type
Bed area:                         10" L-R x 7.5" F-B
Stroke:                           0-3" maximum
Daylight opening (total):         8" maximum
Throat depth:                     4.75"
Ram diameter:                     1.625"/1.125" @ 1000 PSI - 1 ton
Power unit:                       Denison Model. A hydraulic pump 
                                    driven by approx. 3/4 HP 1725 RPM
                                    115/230/1/60 Motor
Speeds approx.:                   600"/Min. - Closing
                                  100"/Min. - Pressing to 1 ton
                                  600"/Min. - Return
Controls:                         On-off switch with stroke &
                                    pressure control
                                  Dual palm buttons
                                  Pressure gauge
Weight approx. 500#
Overall dimensions approx. 15" L-R x 20" F-B x 27" H
Serial No. 2936
Stock No. 23592
                               FOB ELK GROVE VILLAGE, IL

---

CONDITIONS OF SALE

TERMS:	Net cash, or one-third with order, balance before shipment.
CONDITIONS:	All quotations are for immediate acceptance. They are subject to withdrawal, change and prior sale without notice. Shipping dates are only approximate and contingent upon delays beyond our control. All orders received are binding only when they have been accepted and acknowledged by us in writing. Provisions in customer's purchase orders contrary to these conditions shall not be binding upon us unless accepted in writing. Unless otherwise specified, prices quoted are F.O.B. shipping point, exclusive of State, County and Federal taxes which must be added where applicable. Care is taken to give reliable specifications, but these are not guaranteed. We reserve the right to correct typographical errors.
INDEMNIFICATION:	Used Machines may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It is the user's responsibility that the said machines be so equipped and safeguarded to meet OSHA and any other requirements before placing such machinery into operation. User agrees to indemnify and hold Seller harmless of and from any and all claims or liabilities from accidents involving these machines caused by failure of user, his employees, or agent to follow instructions, warnings, or recommendations furnished by manufacturer, or Seller, or by failure of user to comply with Federal, State and Local laws applicable to such equipment including the Occupational Safety and Health Act of 1970. User shall notify Seller promptly after occurrence of any accident involving these machines, and shall cooperate fully with Seller. or Seller's agent in investigating and determining the cause of said accident.
GUARANTEE (Conforming to M.D.N.A. Code of Ethics) MACHINES OFFERED FROM OUR STOCK ARE GUARANTEED TO BE MECHANICALLY SATISFACTORY OR RETURNABLE IN THE SAME CONDITION AS SHIPPED, FREIGHT PREPAID, WITHIN 30 DAYS FROM SHIPMENT FOR COMPLETE REFUND. THIS DOES NOT APPLY TO MACHINES SOLD "AS IS."