400 Ton, Verson HME #K-360 Coin Press, 2-1/8"str., 17" SH, 17" x 17" bed, 45-250 SPM, air cl., Bottom Ejector, Omnilink PLC Controls (#17968)
|
|
400 TON VERSON/HME KNUCKLE JOINT COINING, EMBOSSING, FORMING AND SIZING PRESS
MODEL K 360
AIR CLUTCH AND HIGH SPEED HYDRAGRIP BRAKE
Air Counterbalances Bottom Ejector
Low Profile Underdriven Design
State Of The Art PLC Press Controls Installed 1995
Stroke: 2 1/8"
Slide Adjustment: .562" (Manual)
Shut Height (S.D.A.U.): 17"
Area Of Bed (Nominal): 17" L R x 17" F B
Area of Slide (Nominal): 17.5" L R x 12.5" F B
Distance Between Side Frames: 17.5" L R
Floor To Top Of Bed: 46"
S.P.M.: 45 200 Infinitely Variable
EQUIPPED WITH: Press Mounted Operator Bar With
Dual Palm Buttons, Die Clean
Selector, Bottom Ejector
Selector & Emergency Stop Button
Mechanical Safety Gate
Tonnage Indicator
Automatic Recirculating Lubrication
System
Omni Link 5000 PLC Press Control
System (Software version 2.39)
With LCD Operator Terminal To
Program And Monitor All Vital
Press Functions And Conditions:
i.e. Press (Flywheel) Speed,
Crankshaft Position,
Clutch Brake, Tonnage Vs.
Crankshaft Angle, Stroke Mode
(Inch Single Multi &
Continuous) Ejector Function,
etc. Up To 105 Job Program
Storage & Retrieval W/Batch,
Quality & Order Counter
Communications Port For Interfacing
_ To Electronic Feed Devices etc.
15 HP 1750 RPM 460/3/60 Motor
Driven Variable Speed Reducer
(SMC 2 Allen Bradley
Solid State Motor Controller)
1/4 HP 1670 RPM 460/3/60 Speed
Adjustment Motor
1/4 HP 1670 RPM 460/3/60
Lubrication Pump Motor
Weight Approx. 16,000# (Press); 400# (Control)
Overall Dimensions Approx. 84" L R x 96" F B x 90" H (Press)
30" L R x 36" F B x 60" H (Panel)
Serial No. 16889 Stock No. 17968 Z
Serial No. 16451 Stock No. 17969 Z
Serial No. 16462 Stock No. 17971 Z
Serial No. N/A Stock No. 17973 Z
Serial No. N/A Stock No. 17975 Z
Serial No. 16898 Stock No. 18764 Z
FOB ELK GROVE VILLAGE, IL
(SPECIFICATIONS SUBJECT TO VERIFICATION)
CONDITIONS OF SALE
TERMS: |
Net cash, or one-third with order, balance before shipment. |
CONDITIONS: |
All quotations are for immediate acceptance. They are subject to
withdrawal, change and prior sale without notice. Shipping dates
are only approximate and contingent upon delays beyond our control.
All orders received are binding only when they have been accepted
and acknowledged by us in writing. Provisions in customer's purchase
orders contrary to these conditions shall not be binding upon
us unless accepted in writing. Unless otherwise specified, prices
quoted are F.O.B. shipping point, exclusive of State, County and
Federal taxes which must be added where applicable. Care is taken
to give reliable specifications, but these are not guaranteed.
We reserve the right to correct typographical errors. |
INDEMNIFICATION: |
Used Machines may not incorporate approved activating mechanisms,
operator safety devices or safety guards as required by OSHA or
otherwise. It is the user's responsibility that the said machines
be so equipped and safeguarded to meet OSHA and any other requirements
before placing such machinery into operation. User agrees to indemnify
and hold Seller harmless of and from any and all claims or liabilities
from accidents involving these machines caused by failure of user,
his employees, or agent to follow instructions, warnings, or recommendations
furnished by manufacturer, or Seller, or by failure of user to
comply with Federal, State and Local laws applicable to such equipment
including the Occupational Safety and Health Act of 1970. User
shall notify Seller promptly after occurrence of any accident
involving these machines, and shall cooperate fully with Seller.
or Seller's agent in investigating and determining the cause of
said accident.
|
GUARANTEE
(Conforming to M.D.N.A. Code of Ethics)
MACHINES OFFERED FROM OUR STOCK ARE GUARANTEED TO BE MECHANICALLY
SATISFACTORY OR RETURNABLE IN THE SAME CONDITION AS SHIPPED, FREIGHT
PREPAID, WITHIN 30 DAYS FROM SHIPMENT FOR COMPLETE REFUND. THIS
DOES NOT APPLY TO MACHINES SOLD "AS IS." |
|
