55 Ton Mercury, 8' OA, 6'6" BH, 8' x 12 ga., #23479
|
|
USED 8 FT. X 12 GA. MERCURY PRESS BRAKE
Model no. 3506; Air actuated mechanical clutch
Bending capacities: 8' x 14 ga. mild steel
6' x 10 ga. mild steel
Tonnage capacity: 35 tons @ midstroke
55 tons near bottom
Overall length of bed & ram: 8'
Distance between housings: 6'6"
Stroke: 3"
Ram adjustment: 3"
Shut height S.D.A.U.: 12"
Throat depth: 8"
Width of bed: 3"
Floor to top of bed: 32-1/2"
S.P.M. approx.: 20 - 50
EQUIPPED WITH: Dual palm buttons for run
4-1/4" high die rail
Pushbuttons for start - stop
Manual ram adjustment with
position indicator
Sectional ram die clamps
One shot oil lubrication
3 HP 1760 RPM 220/440/3/60
variable speed drive motor
Weight approx. 8000#
Overall dimensions approx. 112" L-R x 68" F-B x 89" H
Serial no. 5766-91L
Stock no. 23479
FOB ELK GROVE VILLAGE, IL
CONDITIONS OF SALE
TERMS: |
Net cash, or one-third with order, balance before shipment. |
CONDITIONS: |
All quotations are for immediate acceptance. They are subject to
withdrawal, change and prior sale without notice. Shipping dates
are only approximate and contingent upon delays beyond our control.
All orders received are binding only when they have been accepted
and acknowledged by us in writing. Provisions in customer's purchase
orders contrary to these conditions shall not be binding upon
us unless accepted in writing. Unless otherwise specified, prices
quoted are F.O.B. shipping point, exclusive of State, County and
Federal taxes which must be added where applicable. Care is taken
to give reliable specifications, but these are not guaranteed.
We reserve the right to correct typographical errors. |
INDEMNIFICATION: |
Used Machines may not incorporate approved activating mechanisms,
operator safety devices or safety guards as required by OSHA or
otherwise. It is the user's responsibility that the said machines
be so equipped and safeguarded to meet OSHA and any other requirements
before placing such machinery into operation. User agrees to indemnify
and hold Seller harmless of and from any and all claims or liabilities
from accidents involving these machines caused by failure of user,
his employees, or agent to follow instructions, warnings, or recommendations
furnished by manufacturer, or Seller, or by failure of user to
comply with Federal, State and Local laws applicable to such equipment
including the Occupational Safety and Health Act of 1970. User
shall notify Seller promptly after occurrence of any accident
involving these machines, and shall cooperate fully with Seller.
or Seller's agent in investigating and determining the cause of
said accident.
|
GUARANTEE
(Conforming to M.D.N.A. Code of Ethics)
MACHINES OFFERED FROM OUR STOCK ARE GUARANTEED TO BE MECHANICALLY
SATISFACTORY OR RETURNABLE IN THE SAME CONDITION AS SHIPPED, FREIGHT
PREPAID, WITHIN 30 DAYS FROM SHIPMENT FOR COMPLETE REFUND. THIS
DOES NOT APPLY TO MACHINES SOLD "AS IS." |
|
