400 Ton Lawton, 4 post, 100 Ton Transfer, 20" str., 36" DL, 42" x 32" platens, #23993
|
|
USED 400 TON LAWTON TRANSFER MOLDING PRESS
Hydraulic
w/100 ton transfer
4 post type; downstroke
Distance between 5.75" posts: 42" L-R x 17.5" F-B
Area of bed (nominal): 42" L-R x 32" F-B w/5.75" dia.
center hole (T-slotted)
Overall dimensions of bed: 56" L-R x 32" F-B w/5.75" dia.
center hole (T-slotted)
Area of slide (nominal): 42" L-R x 32" F-B (T-slotted)
Overall dimensions of slide: 56" L-R x 32" F-B (T-slotted)
Stroke of fully guided slide: 0 - 20" maximum
Daylight opening (total): 36" maximum
Stroke of transfer ram: 0 - 9" maximum
Main ram diameter: 22.5" @ 1891 PSI - 376 tons
Side ram diameter (2): 4"/1.75" @ 1891 PSI - 24 tons
Transfer ram diameter (upstroke): 12"/5.5" @ 1768 PSI - 100 tons
Floor to top of moving platen: 44"
Power unit (top rear of press): Racine model PVRPSS040ED variable
volume vane pump
Racine model PSVPSS020HLL variable
volume vane pump
Racine model PSVPSS020HRL variable
volume vane pump
All driven by 40 HP 1180 RPM
230/460/3/60 D.E. motor
Speeds Approx.: CLAMP TRANSFER
550"/min. closing 100"/min. closing
0-6"/min. pressing to 400 tons 20"/min. pressing to 100 tons
560"/min. return 130"/min. return
Controls: Pushbutton operation w/stroke &
pressure control
Dual palm buttons
Selector switch for manual or
semi-automatic operation
Cycle timers
Pressure gauge
Weight approx.: 29,000#
Overall dimensions approx. 84" L-R x 96" F-B x 154" H
Serial no. 4001449 (WLFO)
Stock no. 23993
FOB ELK GROVE VILLAGE, IL
(SPECIFICATIONS SUBJECT TO VERIFICATION)
CONDITIONS OF SALE
TERMS: |
Net cash, or one-third with order, balance before shipment. |
CONDITIONS: |
All quotations are for immediate acceptance. They are subject to
withdrawal, change and prior sale without notice. Shipping dates
are only approximate and contingent upon delays beyond our control.
All orders received are binding only when they have been accepted
and acknowledged by us in writing. Provisions in customer's purchase
orders contrary to these conditions shall not be binding upon
us unless accepted in writing. Unless otherwise specified, prices
quoted are F.O.B. shipping point, exclusive of State, County and
Federal taxes which must be added where applicable. Care is taken
to give reliable specifications, but these are not guaranteed.
We reserve the right to correct typographical errors. |
INDEMNIFICATION: |
Used Machines may not incorporate approved activating mechanisms,
operator safety devices or safety guards as required by OSHA or
otherwise. It is the user's responsibility that the said machines
be so equipped and safeguarded to meet OSHA and any other requirements
before placing such machinery into operation. User agrees to indemnify
and hold Seller harmless of and from any and all claims or liabilities
from accidents involving these machines caused by failure of user,
his employees, or agent to follow instructions, warnings, or recommendations
furnished by manufacturer, or Seller, or by failure of user to
comply with Federal, State and Local laws applicable to such equipment
including the Occupational Safety and Health Act of 1970. User
shall notify Seller promptly after occurrence of any accident
involving these machines, and shall cooperate fully with Seller.
or Seller's agent in investigating and determining the cause of
said accident.
|
GUARANTEE
(Conforming to M.D.N.A. Code of Ethics)
MACHINES OFFERED FROM OUR STOCK ARE GUARANTEED TO BE MECHANICALLY
SATISFACTORY OR RETURNABLE IN THE SAME CONDITION AS SHIPPED, FREIGHT
PREPAID, WITHIN 30 DAYS FROM SHIPMENT FOR COMPLETE REFUND. THIS
DOES NOT APPLY TO MACHINES SOLD "AS IS." |
|
