3-1/4" Modern #3LD, Automatic Bar Feeder (24'), 1/4" - 3-1/4" OD cap., #24004
|
|
USED 3-1/4" MODERN TUBE CUTOFF MACHINE
Model no. 3LD with automatic bar feeder
Capacity: 1/4" - 3-1/4" outside diameter mild steel -
maximum wall 1-1/2"
3" maximum sold bar
Spindle speeds (16): 130 to 2012 RPM
EQUIPPED WITH: Two cross slides for heavy chamfering &
plunge forming
Air/hydraulic actuated cams
Approx. 24' modern automatic bar feeder
Combination tool holder & i.d. chamfer
attachment
Press mounted control with pushbuttons for
for start-stop; selector switches for
i.d. chamfer arm off-on; collet open-close;
bar feeder off;
pushbutton for bar feeder manual load &
manual cross slide
Assortment of collets
Coolant pump & motor
10 HP 1180 RPM 230/460/3/60 motor
Weight approx. total 8000# with bar feed
Overall dimensions approx. 118" L-R x 56" F-B x 89" H
(Bar feed 326" L-R x 81" F-B x 50" H)
Serial no. 3LD3459 (WLLU)
Stock no. 24004
FOB ELK GROVE VILLAGE, IL
CONDITIONS OF SALE
TERMS: |
Net cash, or one-third with order, balance before shipment. |
CONDITIONS: |
All quotations are for immediate acceptance. They are subject to
withdrawal, change and prior sale without notice. Shipping dates
are only approximate and contingent upon delays beyond our control.
All orders received are binding only when they have been accepted
and acknowledged by us in writing. Provisions in customer's purchase
orders contrary to these conditions shall not be binding upon
us unless accepted in writing. Unless otherwise specified, prices
quoted are F.O.B. shipping point, exclusive of State, County and
Federal taxes which must be added where applicable. Care is taken
to give reliable specifications, but these are not guaranteed.
We reserve the right to correct typographical errors. |
INDEMNIFICATION: |
Used Machines may not incorporate approved activating mechanisms,
operator safety devices or safety guards as required by OSHA or
otherwise. It is the user's responsibility that the said machines
be so equipped and safeguarded to meet OSHA and any other requirements
before placing such machinery into operation. User agrees to indemnify
and hold Seller harmless of and from any and all claims or liabilities
from accidents involving these machines caused by failure of user,
his employees, or agent to follow instructions, warnings, or recommendations
furnished by manufacturer, or Seller, or by failure of user to
comply with Federal, State and Local laws applicable to such equipment
including the Occupational Safety and Health Act of 1970. User
shall notify Seller promptly after occurrence of any accident
involving these machines, and shall cooperate fully with Seller.
or Seller's agent in investigating and determining the cause of
said accident.
|
GUARANTEE
(Conforming to M.D.N.A. Code of Ethics)
MACHINES OFFERED FROM OUR STOCK ARE GUARANTEED TO BE MECHANICALLY
SATISFACTORY OR RETURNABLE IN THE SAME CONDITION AS SHIPPED, FREIGHT
PREPAID, WITHIN 30 DAYS FROM SHIPMENT FOR COMPLETE REFUND. THIS
DOES NOT APPLY TO MACHINES SOLD "AS IS." |
|
