75 Ton PHI, 4 Post, 4 Opening, 24" x 24" heated platen press, 1982, #24200
|
|
USED 75 TON PHI HOT PLATEN LAMINATING PRESS
New 1982
Hydraulic
Model no. 75R2424S-5ECS-P-YS7-R-X18
4 post upstroke type - 4 opening - floor standing
Distance between 2.5" diameter posts: 28" L-R x 17" F-B
Platen area (nominal): 28" L-R x 25" F-B
Overall dimensions of platen: 35" L-R x 25" F-B
Stroke of fully guided platen: 0-12" maximum
Daylight opening (total): 22"-26" maximum (adjustable)
Daylight opening between hot plates(4): 3" maximum each
Hot plates(5): 24" L-R x 24" F-B x 2.5" thick
(Electrically heated to 450°F -
water cooled)
Insulation(2): 24" L-R x 24" F-B x 1" thick
Main ram diameter(1): 8" @ 2985 PSI - 75 tons
Floor to top of moving platen: 43"
Power unit (base of press): Vickers hydraulic pump,
Driven by 1 HP 1800 RPM 230/460/3/60 motor
Racine hydraulic pump,
Driven by 1 HP 1200 RPM 230/460/3/60 motor
Speeds approx: 52"/min. closing
5"/min. pressing to 75 tons
Gravity return
Controls: Pushbutton operation with stroke,
pressure & pressure rise control
Dual operator pushbuttons
Cycle timers - preheat, cure, cooling
(5) temperature indicating controllers
Low & high pressure gauges
Weight approx. 7500#
Overall dimensions approx. 64" L-R x 45" F-B x 90" H
Serial no. 82-1-018 (1982)
Stock no. 24200
FOB ELK GROVE VILLAGE, IL
CONDITIONS OF SALE
TERMS: |
Net cash, or one-third with order, balance before shipment. |
CONDITIONS: |
All quotations are for immediate acceptance. They are subject to
withdrawal, change and prior sale without notice. Shipping dates
are only approximate and contingent upon delays beyond our control.
All orders received are binding only when they have been accepted
and acknowledged by us in writing. Provisions in customer's purchase
orders contrary to these conditions shall not be binding upon
us unless accepted in writing. Unless otherwise specified, prices
quoted are F.O.B. shipping point, exclusive of State, County and
Federal taxes which must be added where applicable. Care is taken
to give reliable specifications, but these are not guaranteed.
We reserve the right to correct typographical errors. |
INDEMNIFICATION: |
Used Machines may not incorporate approved activating mechanisms,
operator safety devices or safety guards as required by OSHA or
otherwise. It is the user's responsibility that the said machines
be so equipped and safeguarded to meet OSHA and any other requirements
before placing such machinery into operation. User agrees to indemnify
and hold Seller harmless of and from any and all claims or liabilities
from accidents involving these machines caused by failure of user,
his employees, or agent to follow instructions, warnings, or recommendations
furnished by manufacturer, or Seller, or by failure of user to
comply with Federal, State and Local laws applicable to such equipment
including the Occupational Safety and Health Act of 1970. User
shall notify Seller promptly after occurrence of any accident
involving these machines, and shall cooperate fully with Seller.
or Seller's agent in investigating and determining the cause of
said accident.
|
GUARANTEE
(Conforming to M.D.N.A. Code of Ethics)
MACHINES OFFERED FROM OUR STOCK ARE GUARANTEED TO BE MECHANICALLY
SATISFACTORY OR RETURNABLE IN THE SAME CONDITION AS SHIPPED, FREIGHT
PREPAID, WITHIN 30 DAYS FROM SHIPMENT FOR COMPLETE REFUND. THIS
DOES NOT APPLY TO MACHINES SOLD "AS IS." |
|
