4000 lb. Perfecto #2-1/2-8-7, 8" x .090", 54" OD, 7 roll str, pinch rolls, V/S (#20039)
|
|
USED 8" X .090" PERFECTO COIL CRADLE & STRAIGHTENER
MODEL 2-1/2-8-7
w/Inclined Head
STRAIGHTENING SPECIFICATIONS:
Stock Width Capacity: 8" Maximum
Stock Thickness Capacity: .090" Mild Steel
Straightening Rolls (3 Over 4): 2.5" Dia. on 3.75" Centers
(Lower Rolls Power Driven)
Pinch Rolls (1-Set): 3" Diameter
Speeds Approx.: 200 - 1200"/Min.
CRADLE SPECIFICATIONS:
Coil Weight Capacity: 4000#
Width of Coil: 8"
Coil Outside Diameter: 54"
EQUIPPED WITH: Loop Control Arm & Switch
Manual Top Roll Adjustment Via
Hand Crank
Selector Switch For Hand - Off -
Automatic
Pushbuttons For Forward - Reverse -
Stop
Stock Edge Guide
Chain Driven Cradle Rolls
Manually Adjustable Cradle Side Guide
Plates Via Hand Crank
3 HP 1740 RPM 220/440/3/60 Reeves
Variable Speed Drive Motor
Weight approx. 4000#
Overall Dimensions Approx. 41" L-R x 105" F-B x 55" H
Serial No. SC-2363 (WLRX)
Stock No. 20039
FOB ELK GROVE VILLAGE, IL
CONDITIONS OF SALE
TERMS: |
Net cash, or one-third with order, balance before shipment. |
CONDITIONS: |
All quotations are for immediate acceptance. They are subject to
withdrawal, change and prior sale without notice. Shipping dates
are only approximate and contingent upon delays beyond our control.
All orders received are binding only when they have been accepted
and acknowledged by us in writing. Provisions in customer's purchase
orders contrary to these conditions shall not be binding upon
us unless accepted in writing. Unless otherwise specified, prices
quoted are F.O.B. shipping point, exclusive of State, County and
Federal taxes which must be added where applicable. Care is taken
to give reliable specifications, but these are not guaranteed.
We reserve the right to correct typographical errors. |
INDEMNIFICATION: |
Used Machines may not incorporate approved activating mechanisms,
operator safety devices or safety guards as required by OSHA or
otherwise. It is the user's responsibility that the said machines
be so equipped and safeguarded to meet OSHA and any other requirements
before placing such machinery into operation. User agrees to indemnify
and hold Seller harmless of and from any and all claims or liabilities
from accidents involving these machines caused by failure of user,
his employees, or agent to follow instructions, warnings, or recommendations
furnished by manufacturer, or Seller, or by failure of user to
comply with Federal, State and Local laws applicable to such equipment
including the Occupational Safety and Health Act of 1970. User
shall notify Seller promptly after occurrence of any accident
involving these machines, and shall cooperate fully with Seller.
or Seller's agent in investigating and determining the cause of
said accident.
|
GUARANTEE
(Conforming to M.D.N.A. Code of Ethics)
MACHINES OFFERED FROM OUR STOCK ARE GUARANTEED TO BE MECHANICALLY
SATISFACTORY OR RETURNABLE IN THE SAME CONDITION AS SHIPPED, FREIGHT
PREPAID, WITHIN 30 DAYS FROM SHIPMENT FOR COMPLETE REFUND. THIS
DOES NOT APPLY TO MACHINES SOLD "AS IS." |
|
