350 Ton Eemco, 72" str,. 84" DL, 105" x 60" platens, w/ 100 Ton Top Transfer (#15924)
|
|
USED 350 TON EEMCO HYDRAULIC TRANSFER MOLDING PRESS
Upstroke Type
4 Post
Rated Tonnage: 350 Tons @ 2920 PSI
Upper Transfer Rated at 100 Tons
Size of Shot: 80# Maximum
Stroke of Lower Platen: 72"
Daylight: 84"
Overall Platen Size: 105" L-R x 60" F-B
Distance Between 6" Posts: 87" L-R x 43" F-B
Distance Bottom of Bed Floor Pads to
Top of Lower Platen (Cylinder Retracted): 66"
EQUIPPED WITH: Floor Mounted Hydraulic Unit
Up-Moving Knockout Plate (Used to
Mount Bottom Knockout Rods)
36" Adjustment on Rods W/3" Increments
on Adjustment
(1) Double Acting Main Cylinder,
16" Diameter Bore Rated 293 Ton
Clamp Force, 90 Ton Stripping Force @
2000 PSI
(2) Single Acting Auxiliary Cylinders
3" Diameter Rated @ 28.5 Tons
Prefill Valve on Main Cylinder
Top Mounted 1750 Cu. In. Material
Accumulator
Control Panel & Electrical Console
Overall Dimensions Approx. 12' L-R x 6' F-B x 21' High
(Machine Mounted in Pit: 13' L-R x 6' F-B x 11' Deep)
Serial No. 742657 (WLFU)
Stock No. 15924-Z
FOB OHIO SHIPPING POINT
(SPECIFICATIONS SUBJECT TO VERIFICATION)
CONDITIONS OF SALE
TERMS: |
Net cash, or one-third with order, balance before shipment. |
CONDITIONS: |
All quotations are for immediate acceptance. They are subject to
withdrawal, change and prior sale without notice. Shipping dates
are only approximate and contingent upon delays beyond our control.
All orders received are binding only when they have been accepted
and acknowledged by us in writing. Provisions in customer's purchase
orders contrary to these conditions shall not be binding upon
us unless accepted in writing. Unless otherwise specified, prices
quoted are F.O.B. shipping point, exclusive of State, County and
Federal taxes which must be added where applicable. Care is taken
to give reliable specifications, but these are not guaranteed.
We reserve the right to correct typographical errors. |
INDEMNIFICATION: |
Used Machines may not incorporate approved activating mechanisms,
operator safety devices or safety guards as required by OSHA or
otherwise. It is the user's responsibility that the said machines
be so equipped and safeguarded to meet OSHA and any other requirements
before placing such machinery into operation. User agrees to indemnify
and hold Seller harmless of and from any and all claims or liabilities
from accidents involving these machines caused by failure of user,
his employees, or agent to follow instructions, warnings, or recommendations
furnished by manufacturer, or Seller, or by failure of user to
comply with Federal, State and Local laws applicable to such equipment
including the Occupational Safety and Health Act of 1970. User
shall notify Seller promptly after occurrence of any accident
involving these machines, and shall cooperate fully with Seller.
or Seller's agent in investigating and determining the cause of
said accident.
|
GUARANTEE
(Conforming to M.D.N.A. Code of Ethics)
MACHINES OFFERED FROM OUR STOCK ARE GUARANTEED TO BE MECHANICALLY
SATISFACTORY OR RETURNABLE IN THE SAME CONDITION AS SHIPPED, FREIGHT
PREPAID, WITHIN 30 DAYS FROM SHIPMENT FOR COMPLETE REFUND. THIS
DOES NOT APPLY TO MACHINES SOLD "AS IS." |
|
