250 Ton Clearing, Housing, 130 Ton Hyd Cushion, 30" Str, 46" DL, 72" x 48" Bed (#21020)
|
|
USED 250 TON CLEARING HYDRAULIC PRESS
w/130 Ton Hydraulic Cushion
Housing Type - 8-Pt. Gibbing
Distance Between side Housings: 77.5" L-R
Distance Between Positive Stops: 74" L-R
Area of Bed (Nominal): 72" L-R x 48" F-B
Bed Bolster: 72" L-R x 48" F-B x 10" Thick
(T-Slotted)
Area of Slide (Nominal): 72" L-R x 48" F-B
Slide Bolster: 72" L-R x 48" F-B x 3" Thick
(T-Slotted)
Stroke of Gib Guided Slide: 0 - 30" Maximum
Daylight Opening (Total): 46" Maximum
Daylight Opening Between Slide &
Bed Bolster: 36" Maximum
Area of Cushion Pad: 56" L-R x 25" F-B
Stroke of Cushion: 0 - 12" Maximum
Main Ram Diameter (1): 11" @ 2726 PSI - 130 Tons
Side Ram Diameter (2): 7.5" @ 2726 PSI - 120 Tons
Pullback Cylinders (2): 4"/2.25"
Floor to Top of Press: To Suit Customer
Power Unit (Top of Press): Oilgear Model DV-H-10025 Hydraulic
Pump
Driven by 100 HP 900 RPM
460/3/60 Motor
Speeds Approx.: 960"/Min. Closing
90"/Min. Pressing to 250 Tons
960"/Min. Return
Controls: Pushbutton Operation w/Stroke &
Pressure Control
Dual Palm Buttons
Selector Switch For Manual or
Semi-Automatic Operation
(3) Knockout Slide Bars
Pressure Gauge
*Link Lite Black Max Light Curtain
Overall Dimensions Approx. 127" L-R x 118" F-B x 176" H (Above Floor)
(Cushion Extends Approx. 62" Below Floor Line)
Serial No. 11-5267 (WLFX)
Stock No. 21020
FOB ELK GROVE VILLAGE, IL -
*Safety Light Curtain Being
Offered w/No Warranty.
CONDITIONS OF SALE
TERMS: |
Net cash, or one-third with order, balance before shipment. |
CONDITIONS: |
All quotations are for immediate acceptance. They are subject to
withdrawal, change and prior sale without notice. Shipping dates
are only approximate and contingent upon delays beyond our control.
All orders received are binding only when they have been accepted
and acknowledged by us in writing. Provisions in customer's purchase
orders contrary to these conditions shall not be binding upon
us unless accepted in writing. Unless otherwise specified, prices
quoted are F.O.B. shipping point, exclusive of State, County and
Federal taxes which must be added where applicable. Care is taken
to give reliable specifications, but these are not guaranteed.
We reserve the right to correct typographical errors. |
INDEMNIFICATION: |
Used Machines may not incorporate approved activating mechanisms,
operator safety devices or safety guards as required by OSHA or
otherwise. It is the user's responsibility that the said machines
be so equipped and safeguarded to meet OSHA and any other requirements
before placing such machinery into operation. User agrees to indemnify
and hold Seller harmless of and from any and all claims or liabilities
from accidents involving these machines caused by failure of user,
his employees, or agent to follow instructions, warnings, or recommendations
furnished by manufacturer, or Seller, or by failure of user to
comply with Federal, State and Local laws applicable to such equipment
including the Occupational Safety and Health Act of 1970. User
shall notify Seller promptly after occurrence of any accident
involving these machines, and shall cooperate fully with Seller.
or Seller's agent in investigating and determining the cause of
said accident.
|
GUARANTEE
(Conforming to M.D.N.A. Code of Ethics)
MACHINES OFFERED FROM OUR STOCK ARE GUARANTEED TO BE MECHANICALLY
SATISFACTORY OR RETURNABLE IN THE SAME CONDITION AS SHIPPED, FREIGHT
PREPAID, WITHIN 30 DAYS FROM SHIPMENT FOR COMPLETE REFUND. THIS
DOES NOT APPLY TO MACHINES SOLD "AS IS." |
|
