300 Ton HPM, CU2, Housing Type, 30" Str, 41.5" DL, 72" x 48" Bed, 130 Ton Hyd Cushion (#21019)
|
|
USED 300 TON HPM HYDRAULIC PRESS
w/130 Ton Hydraulic Cushion
Model HD-300-72X48
Housing Type
Distance Between Gibs: 76" L-R
Distance Between Positive Stops: 72.5" L-R
Area of Bed (Nominal): 72" L-R x 48" F-B
Bed Bolster: 72" L-R x 48" F-B x 6.5" Thick
(T-Slotted)
Area of Slide (Nominal): 72" L-R x 48" F-B (T-Slotted)
Windows: 23" F-B
Stroke of Gib Guided Slide: 0 - 30" Maximum
Daylight Opening (Total): 41.5" Maximum
Daylight Opening Over Bolster: 35" Maximum
Area of Cushion Pad: 56" L-R x 32" F-B
Stroke of Cushion: 0 - 9" Maximum
Main Ram Diameter: 17"/16" @ 2650 PSI - 300 Tons
Cushion Ram Diameter: 9" @ 4087 PSI - 130 Tons With
3.75" Booster Ram
Floor to Top of Bed: To Suit Customer
Power Unit (Top of Press): HPM Model 7R200 Hydraulic Pump
Driven by 125 HP 880 RPM
460/3/60 Motor
Speeds Approx.: 975"/Min. Closing
110"/Min. Pressing to 300 Tons
975"/Min. Return
Controls: Pushbutton Operation w/Stroke &
Pressure Control
Dual Operator Controls
Selector Switch For Manual or
Semi-Automatic Operation
(3) Slide Knockout Bars
Pressure Gauges
*Link Lite Blackmax Light Curtain
Weight approx. 76,000#
Overall Dimensions Approx. 11'2" L-R x 10'2" F-B x 18'2" Above Floor Line
(Cushion Extends Approx. 44" Below Floor Line)
Serial No. 68-226 (WLRU)
Stock No. 21019
FOB ELK GROVE VILLAGE, IL -
*Light Curtain Being
Offered w/No Warranty.
CONDITIONS OF SALE
TERMS: |
Net cash, or one-third with order, balance before shipment. |
CONDITIONS: |
All quotations are for immediate acceptance. They are subject to
withdrawal, change and prior sale without notice. Shipping dates
are only approximate and contingent upon delays beyond our control.
All orders received are binding only when they have been accepted
and acknowledged by us in writing. Provisions in customer's purchase
orders contrary to these conditions shall not be binding upon
us unless accepted in writing. Unless otherwise specified, prices
quoted are F.O.B. shipping point, exclusive of State, County and
Federal taxes which must be added where applicable. Care is taken
to give reliable specifications, but these are not guaranteed.
We reserve the right to correct typographical errors. |
INDEMNIFICATION: |
Used Machines may not incorporate approved activating mechanisms,
operator safety devices or safety guards as required by OSHA or
otherwise. It is the user's responsibility that the said machines
be so equipped and safeguarded to meet OSHA and any other requirements
before placing such machinery into operation. User agrees to indemnify
and hold Seller harmless of and from any and all claims or liabilities
from accidents involving these machines caused by failure of user,
his employees, or agent to follow instructions, warnings, or recommendations
furnished by manufacturer, or Seller, or by failure of user to
comply with Federal, State and Local laws applicable to such equipment
including the Occupational Safety and Health Act of 1970. User
shall notify Seller promptly after occurrence of any accident
involving these machines, and shall cooperate fully with Seller.
or Seller's agent in investigating and determining the cause of
said accident.
|
GUARANTEE
(Conforming to M.D.N.A. Code of Ethics)
MACHINES OFFERED FROM OUR STOCK ARE GUARANTEED TO BE MECHANICALLY
SATISFACTORY OR RETURNABLE IN THE SAME CONDITION AS SHIPPED, FREIGHT
PREPAID, WITHIN 30 DAYS FROM SHIPMENT FOR COMPLETE REFUND. THIS
DOES NOT APPLY TO MACHINES SOLD "AS IS." |
|
