Used Plate Bending Roll, Slip Roll
Select from one of the world's largest inventories of pre-owned bending rolls.
- Types: Power Rolls (Plate Bending and Slip), Metal Rolls and Urethane Rolls.
- Manufacturers: Webb, Bertsch, Wysong and others.
-
18" x 3/16" Lisse B50-50, Urethane, Hydraulic, hyd. drop end, #24277
USED 18" X 3/16" LISSE URETHANE ROLL
-
20" x .118" Faccin HCU Urethane Roll, Load & Eject System, 2003, #24349
USED 20" X .118" FACCIN HYDRAULIC URETHANE ROLL
-
2' x 10 ga. Wysong #B24, 4-1/4" roll dia., air drop end, #24304
USED 2 FT. x 10 GA. WYSONG PLATE BENDING ROLL
-
3' x 14 ga. Webb #3036, 3-1/4" roll diameter, #24259
USED 3 FT. x 14 GA. WEBB SLIP ROLL
-
3' x 10 ga. Webb #4036, 4" roll diameter, #24273
USED 3 FT. x 10 GA. WEBB SLIP ROLL
-
3' x 3/16" Acrotech HD-31636, K-Prene, one pass, hyd. drop end and roll adj., #24301
USED 3 FT. X 3/16" ACROTECH URETHANE ROLL
-
40" x 14 ga. Faccin HCU1050X2-P, Urethane, Hydraulic, 2003, #24188
USED 40" X 14 GA. FACCIN HYDRAULIC URETHANE ROLL
-
4 ft x 16-18 ga. Pexto, 3" roll diameter, #23442
USED 4' x 16-18 GAUGE PEXTO PLATE BENDING ROLL
-
4' x 12-14 ga. Pexto mdl. PF4-50, 4-1/4" roll dia., 50-1/2" roll length, #24080
USED 4 FT. X 12-14 GAUGE PEXTO PLATE BENDING ROLL
-
4' x 12-14 ga. Wysong, #B48, 4-1/4" roll dia., 48" roll length, air drop, #24037
USED 4 FT. X 12-14 GAUGE WYSONG PLATE BENDING ROLL
-
4' x 12 ga. Reed #450, 4-1/4" roll dia., pwr. rear roll adj., #24521
USED 4 FT. X 12 GAUGE REED SLIP ROLL
-
4' x 1/4" Barnes, 7" roll diameter, pwr. rear roll adj., #24323
USED 4 FT. X 1/4" BARNES SLIP ROLL
-
5' x 24 ga. P and J Pipe Roll, Bead & Crimp Mechanism, #23023
USED 5 FT. X 24 GAUGE P&J PIPE ROLL
-
5' x 1/4" Wysong D-60, 6-1/2" roll dia., air drop end, pwr. rear roll adj., #24258
USED 5 FT. X 1/4" WYSONG PLATE BENDING ROLL
-
6' x 10 ga. Amerecon, 5.1" roll dia., cone attachment, 1999, #24480
USED 6 FT. X 10 GAUGE AMERECON PLATE BENDING ROLL
-
6' X 3/16" Bertsch No. 6, 6" roll dia., air drop end, pwr rear roll, #24504
USED 6 FT. x 3/16" BERTSCH PLATE BENDING ROLL
-
6' x 3/16" Hendley & Whittemore #3-E, 6" roll dia., #24057
USED 6 FT. x 3/16" HENDLEY & WHITTEMORE PLATE BENDING ROLL
-
6' x 3/16" Hendley and Whittemore #3-E, 6" roll dia., #24226
USED 6 FT. x 3/16" HENDLEY & WHITTEMORE PLATE BENDING ROLL
-
8' x 10 ga. Reed #608, 6" dia. rolls, #24523
USED 8 FT. X 10 GAUGE REED PLATE BENDING ROLL
-
8' x 10 ga. Steco IP3, 6-1/2" roll dia., pwr rear roll adj., #24306
USED 8 FT. X 10 GAUGE STECO PLATE BENDING ROLL
-
8'x 3/8" Bertsch #8, 9" roll dia., Air Drop End, Power Rear Roll Adj., #24380
USED 8 FT. X 3/8" BERTSCH PLATE BENDING ROLL
-
10' x 1/4" Niagara #9-120, 9" roll dia., air drop end, pwr. rear roll adj., #24340
USED 10 FT. X 1/4" NIAGARA PLATE BENDING ROLL
-
10' x 1" Davi, Hydraulic, 4 Roll, 16-1/2" top & bottom rolls, 1990, #24405
USED 10 FT. X 1" DAVI PLATE BENDING ROLL
|
