Glass Equipment Auction - Dallas, TX Liquidation

Dallas Texas Auction
Insulated Glass Manufacturing  Facility being Liquidated

Featuring

FULLY AUTOMATED GLASS CUTTING, TEMPER & INSULATED GLASS ASSEMBLY LINE
2018 LISEC FULLY AUTOMATED GLASS CUTTING, TEMPER & INSULATED GLASS ASSEMBLY LINES INCLUDING:
INTRODUCTION/CUTTING LINE INCLUDING:
•VERTICAL 13-RACK AUTOMATED STORAGE GLASS STORAGE SYSTEM
•(23) A-FRAME STEEL GLASS STORAGE RACKS, SOME DUAL SIDED
•AUTOMATED GLASS TILT TABLE LOADING SYSTEM ON TRACK
•SAFETY LIGHT CURTAINS AND SAFETY CAGES THROUGHOUT SYSTEM
•REMNANT PLATE STORAGE SYSTEM, 30 SLOTS
•AUTOMATIC LOADING & DOUBLE SIDED STATIONARY GLASS UNLOADING STATIONS, 22' X 119"
• 10 KN DOUBLE GIRDER OVERHEAD BRIDGE CRANE WITH DOUBLE SIDED GLASS PLATE VERTICAL TRANSFER SYSTEM, 5-ARM, PENDANT CONTROL
•AUTOMATIC GLASS CUTTING TABLE, TYPE GFB 60/30
•RESIDUAL GLASS CUT OFF DEVICE, TYPE RP-331
•CROSS OVER MEZZINE STAIRS
•LISEC MBF-372 DRO STAND STATION CONTROLS
•PNUEMATIC REGULATORS
•ACRO WAND VACUUM CLEANER SYSTEM
•MANUAL BREAK-OUT TABLE, CUSHIONED AIR BED, 260" X 137"
•AUTOMATIC BREAK-OUT DEVICE FOR LATERAL TRIM, Y-AXIS
•AUTOMATIC STATIC Z BREAK-OUT STATION, HORIZONTAL ROLLER CONVEYOR WITH BREAK OFF HORIZONTAL CATCH BINS
•(2) HORIZONTAL TRANSPORT FIELD WITH BELTS
•FULLY AUTOMATED GLASS TILTING STATION
•GLASS TRANSPORT & STORING STATION LINE WITH (2) MANUAL LOAD/UNLOAD STATIONS
•GLASS TRANSPORT & MEAURING STATION, TYPE RTVN-27/27MZ
•AUTOMATIC GLASS EDGE GRINDING MACHINE, TYPE KSR-27, TOP/SIDE EDGE GRINDING    
•GLASS EDGE GRINDING MACHINE, TYPE KSV-27, BOTTOM EDGE GRINDING
•AUTOMATIC GLASS WASHING AND DRYING STATION, TYPE VHW-D27/V8
•KSR/KSV/VHW WATER, FEED & FILTER TANKS
•SOFT SOLUTIONS LINE SCANNER
•THIN LIGHT 4-ZONE LIGHTED INSPECTION AREA
•PNUEMATIC ACCESSIBLE SINGLE DOOR

AUTOMATIC SORTING MANAGMENT SYSTEM (ASM) INCLUDING: (2) FULLY AUTOMATIC GLASS TRANSPORT SHUTTLES & AUTOMATIC GLASS SHEET SORTING MAGAZINE      

CUT GLASS TRANSPORT & STORING STATION RETURN LINE TO FRONT GLASS SHEET STORAGE SORTING MAGAZINE, (2 SETS) PNEUMATIC DOUBLE ACCESS DOORS

SINGLE STATION ASM MANIPULATOR INSPECTION STATION WITH FLOATING OVERHEAD BRIDGE CRANE WITH WPG PLATE VAC AND CONTROL STATIONS

GLASS PRESSURE/BREAKING SYSTEM

GLASS TEMPER/HEAT TREAT LINE
•GLASS TRANSPORT & STORING STATIONS, TYPE RTVB-32/27ST
•FULLY AUTOMATED DUAL GLASS TILTING STATION
•BELT & ROLLER CONVEYOR FEED TRANSFER TABLE
•KEVLAR ROLLER FURNACE INFEED TABLE WITH INTERGARTED OFF LOAD BALL FIELD LIFT TABLE
•2018 LANDGLASS JET CONVECTION COMBINED FLAT GLASS TEMPERING FURNACE, MODEL A2850T3, MANU.# 1807069, 4-19 MM THICKNESS RANGE, OVERALL SIZE 38.5M X 3.6M X 2.03M, DUAL FURNACE, 7 CONVECTION BLOWER PER/FURNACE, 56 BPTTOM ELEMENTS PER FURNACE
•COMPUTER CONTROL & DRO STATIONS
•LIGHT SENTRY OSPREY 8 DISTORTION & FLATNESS INSPECTION SYSTEM WITH OUT ROLLER CONVEYOR 
•ZEBRA LABEL PRINTING STATION
•ROLLER/BELT CONVEYOR OUTFEED SYSTEM
•FULLY AUTOMATED GLASS TILTING STATION,  TYPE RKT-50/27KLA
• GLASS TRANPORT & STORING STATION RETURN TO FRONT SORTING MAGAZINE
•(2) PNEUMATIC ACCESS DOORS
•MEASURING & INSPECTION STATION
•SAFETY LIGHT CURTAINS AND SAFETY CAGES

TRANSPORT, LOADING & SORTING SYSTEMS
2019 AUTOMATIC SORTING MAGAZINE SYSTEM(ASM) FRONT ASM, INCLUDING (3) FULLY AUTOMATIC GLASS TRANSPORT SHUTTLES TYPE SHL-50/27E,(2) AUTOMATIC GLASS SHEET SORTING MAGAZINE TYPE ASM-50/4,  AMERICAN VACCUUM SYSTEM, MCC CABINETS               
AUTOMATED LOADING STATION SYSTEM FOR MEB/SLOT STORAGE RACK CONVEYORS, (20) RACK CONVEYORS, CONTROL CABINET, STATION FOR UNLOADING MOBILE ELEMENT BUFFERS TYPE EBU-A25/15
GLASS TRANSPORT & STORING STATION MEASURING & LABELING AREA, LISEC MBF 372 DRO STATION STANDS OFF FRONT SORTING MAGAZINE

INSULATED GLASS ASSEMBLY LINE
2019 LISEC INSULATED GLASS ASSEMBLY LINE INCLUDING:
•2019 ROTATING ANGLING MODIFIER TILTI G STATION TYPE NWLD-50/27
•GLASS TRANSPORT & STORING STATIONS
•SINGLE PNUEMATIC ACCESS DOOR
•VERTICAL GRINDING MACHINE, TYPE AKL-27S
•AUTOMATED GLASS WASHING AND DRYING STATION
•SOFT SOLUTIONS LINE SCANNER
•THIN LIGHT 4-ZONE LIGHTED INSPECTION AREA
•FRAME MOUNTING STATION, TYPE RSV-27/27B
•COOL OFF AREA WITH (2) FILTERED BLOWERS
•APPLICATOR FOR THERMOPLASTIC SPACER FRAMES, TYPE TPA-A27 
•CLOSING UNIT FOR THERMOPLASTIC SPACER BARS, TYPE RTVB-15/27TJ
•GLASS TRANSPORT AND MEASURING STATION
•ASSEMBLING GAS FILLING PRESS, TYPE AGP-A50/29
•APPLICATION DEVICE FOR DISTANCING CORKPADS, TYPE APKV-A27
•AUTOMATIC GLASS EDGE SEALING MACHINE, TYPE VFL-1F50/27
• EDGE SEALANT CLEAN/FORM STATION WITH LIGHTED LINE STATION
•VIDEOJET 1710 LASER PRINTER
•NOVEXX ALX 924 LABEL PRINTER SYSTEM
•LISEC MBF 372 & APK-V DRO CONTROL STATION STANDS
•SAFETY LIGHT CURTAINS AND SAFETY CAGES
•BRIDGE TYPE UNIT TAKE-OFF SYSTEM, TYPE UTS-25/15

ASSORTED GLASS SHEETS
LARGE SELECTION OF GLASS SHEETS UP TO 204"L X 130"W, ASSORTED THICKNESS, COATING AND SHADES

MISC. GLASS LINE & RELATED ITEMS
APPLICATION DEVICE FOR DISTANCING/APPLICATING CORKPADS, ACCUMULATION AREA, LABEL PRINTER, CONTROL STATION
ROBOT CERAMIC CLEANER INSERTION ATTACHMENT WITH CONTROLS
(2) SINGLE GLASS INSPECTION LIGHTED STATIONS
KEVLAR ROLLER WINDER/INSTALLER WITH RACK OF KEVLAR ROLLS
(30+) A-FRAME TOWABLE GLASS TRANSFER/HOLDING CARTS
(200+) STEEL GLASS TRANSPORT RACKS, SOME WITH SIDE SUPPORTS

MATERIAL HANDLING EQUIPEMENT, GOLF CARTS, ATTACHMENTS, AND CHARGERS
DOOSAN 4,100 LB FORKLIFT, MODEL GS30E-5, LP,  189" LIFT HEIGHT, CASCADE HYDRAULIC ROTARY FORK ATTACHMENT, SIDESHIFT, 3-STAGE ON PAR MAST, SN FGAOM-1790-00117, FORK RACK, SOLID CUSHION TIRES, 20131.5 HOURS
DOOSAN 5,150 LB FORKLIFT, MODEL GC30E-5, LP, 189" LIFT HEIGHT,  3-STAGE ON PAR MAST, SIDESHIFT,  SN FGOM-1790-00114, SOLID CUSHION TIRES,  FORK RACK,6' FORKS, 5,280 HOURS
DOOSAN 5,150 LB FORKLIFT, MODEL GC30E-5, LP, 189" LIFT HEIGHT,  3-STAGE ON PAR MAST, SIDESHIFT, SN FGAOM-1790-00109, SOLID CUSHION TIRES,  FORK RACK , 41" FORKS, 4,282 HOURS
DOOSAN 5,150 LB FORKLIFT, MODEL GC30E-5, LP, 189" LIFT HEIGHT,  3-STAGE ON PAR MAST, SIDESHIFT, SOLID CUSHION TIRES,  FORK RACK ,41" FORKS, SN FGAOM-1790-00113, 4,728 HOURS
DOOSAN 5,150 LB FORKLIFT, MODEL GC30E-5, LP, 189" LIFT HEIGHT,  3-STAGE ON PAR MAST, SIDESHIFT, SOLID CUSHION TIRES,  FORK RACK ,41" FORKS , SN FGAOM-1790-00122, 3,926 HOURS
YALE 8,400 LB. FORKLIFT,  MODEL GLP080VXNGGF097, SN F813V01897E, LP 144.7" LIFT HEIGHT, 2-STAGE 96" MAST, SOLID TIRES, FORK RACK, 6' FORKS, 6,008 HOURS
(4) CLUB CAR ELECTRIC GOLF CARTS, UTILITY BEDS, CANOPY, PNUEMATIC TIRES
(3) YALE ELECTRIC TUGGER TRUCK, MODEL MTR005LEN24T, 24V, 700 LB. DRAWBAR PULL, RIDE ON TYPE
YALE 5,700 LB FORKLIFT, MODEL GLC060VXNVSE088, LP, 187.8" LIFT HEIGHT, 3-STAGE MAST, WIDE 42" FORKS, SIDESHIFT (OUT OF SERVICE)
GENIE GS-2632 ELECTRIC SCISSOR LIFT, EXTENDED PLATFORM, 500 LB. CAPACITY,  32' LIFT HEIGHT CAPACITY, 120V CHARGE, NON-MARKING TREAD TIRES
2001 GENIE Z-45/25J ELECTRIC ARTICULATING KNUCKLE BOOM LIFT, 2,096 HOURS, DC POWER, DUOBLE MAN BASKET,500 LB CAPACITY, SN Z4525-19422 
(4) WORKHORSE SERIES 2 24V FORKLIFT BATTERY CHARGERS
FORKLIFT BATTERY CHARGING RACK, 4-BANK
VESTIL TELESCOPING FORKLIFT BOOM, 7' RETACTED
DRUM CHANGER FORKLIFT BOOM
(3) SETS OF FORKLIFT FORKS

MACHINE SHOP & MAINTENANCE EQUIPMENT
JET GH-1860ZX HORIZONTAL ENGINE LATHE, 80" GAP BED, PRECISION TAILSTOCK, CROSS SLIDE, TOOLPOST, STEADY REST,  10" 3-JAW CHUCK,  3" BAR THROUGH SPINDLE,  ACU-RITE DRO CONTROL
2019 COSEN MECHTRONICS AUTOMATIC HYDRAULIC VERTICAL BANDSAW,  MODEL V-2026NC, SN 108CM00648
VECTRAX VERTICAL MILLING MACHINE,  3 GP, 49" X 9" TABLE, ACU-RITE DRO CONTROL, KNEE BED, 70-4200 RPM
SUNEX 40 TON H-FRAME AIR/HYDRAULIC SHOP PRESS, MODEL 5740AH, 35" WINDOW
MILLER MILLERMATIC 251 WIRE WELDER ON CART WIRH LEADS AND HEAD
MILLER SYNCROWAVE 200 CC-AC/DC SQUAREWAVE WELDER ON CART WITH COOLMATE 3 CHILLER
HYPERTHERM POWERMAX 45 XP PLASMA CUTTER ON STEEL CART WITH HOSE REEL
JET 5" X 8" HORIZONTAL/VERTICAL BANDSAW,  MODEL J-3230
DEWALT 12" COMPOUND MITER SAW WITH DAYTON 2-STAGE DUST COLLECTOR AND ROLLER CONVEYOR INFEED/OUTFEED TABLE
ASSORTED HAND, PNEUMATIC AND POWER TOOLS - SANDERS, SCREW GUNSWRENCHES, STAPLES, SQUARES, SCREW DRIVERS, HAMMER SNIPS

GENERAL FACILITY EQUIPMENT
INGERSOLL-RAND R75N NIRVANA EFFICIENCY TOTAL AIR SYSTEM ROTARY SCREW AIR COMPRESSOR,  100 HP, SN NK3636U19005
(2) ROCK RIVER 10-GALLON HORIZONTAL AIR COMPRESSOR,  13 RHP, 7.5 HP PUMP, 175 PSI, 24 CFM
PHILADELPHIA TRAMRAIL BALERS, MODEL 3400HD, FRONT UNLOAD DOOR
(17) McCULLOUGH SELF DUMPING LIFT TRUCK HOPPERS
(5) 5,500 LB HYDRAULIC PALLET JACKS
(7) PNEUMATIC SELF-RETRACTING HOSE REELS
(8) BANDING CARTS WITH CLIPS AND BANDING TOOL
HOT MELT BENCHMARK 205-LV GLUE POT, 2 GUN SYSTEM
(8) 11-DRAWER FASTENAL MODULAR TOOL CABINETS WITH LISEC SUPPORT PARTS
GRAINGER SLIDE HARDWARE DRAWER BIN SYSTEMS
(15+) ROLLING TOOL CHESTS, VARIOUS MAKES, STYLES AND SIZES
STEEL WELDING/LAYOUT TABLES
FLAMMABLE STORAGE CABINETS
OFFICE EQUIPMENT INCLUDING DESKS, TABLES, CHAIRS, CONFERENCE TABLE, MICROWAVES, REFRIGERATOR

CRANES & HOISTS
DEMAG 7.5-TON DOUBLE GIRDER OVERHEAD BRIDGE CRANE WITH ELECTRIC HOIST WITH WIRELESS PENDANT CONTROL, 40' SPAN
DEMAG 3 TON SINGLE GIRDER OVERHEAD BRIDGECRANE WITH ELECTRIC CHAIN HOIST WITH PENDANT CONTROL
(8) 1-TON FREE FLOATING OVERHEAD BRIDGE CRANES, ELECTRIC CHAIN HOIST WITH 500 LB. WPG GLASS PLATE VACUUM LIFTERS
(6+) ELECTRIC CHAIN HOISTS
ASSORTMENT OF LIFTING LEG CABLES & SLINGS

RACKING & CONTENTS
(21) BAYS OF TEARDROP PALLET RACKING, 96"T X 48"D UPRIGHTS, 9' X 4 1/2" BEAMS, WIRE DECKING
CANTILEVER RACKS WITH ASSORTED LUMBER
(35) SECTIONS OF MEDIUM DUTY SHELVING WITH LISEC AND SHOP SUPPORT ITEMS                    
CONTENTS OF PALLET RACK INCLUDING: BANDING MATERIAL, GRAYBOARD, EDGE PROTECTORS, TOWELS, DRUMS,  WIRE DECKING, CASTERS, LIFTING STRAPS, PUMPS, SHRINK WRAP, GEAR BOXES AMD MORE
LIGHT DUTY SHELVING WITH GLUE POT SUPPORT, RIVOT GUNS, VIDEOJET MEDIA, LABELS AND MORE